A Complete Buyer’s Guide for 2026
The magnetic contactor price in Bangladesh can swing from under Tk 2,000 for a small unit to more than Tk 45,000 for a large industrial one. That gap confuses a lot of buyers, and it is the reason many people overpay, or worse, buy a contactor that fails in a few months.
In this guide, you will see real listed prices in taka for popular brands and ratings, learn how to match a contactor to your motor, and understand why two contactors with the same amp rating can cost very different amounts. We also cover fake products, coil voltages and the questions buyers ask most.
integrated-power supplies and advises on electrical control gear, so we have written this for the person who has to choose, specify and pay for the part.
What a Magnetic Contactor Does
A magnetic contactor is an electrically controlled switch. A small control signal energises a coil, the coil pulls in a set of heavy contacts, and the load, usually a motor, gets power. Remove the signal and the contacts open.
You will find them inside motor starters, pump panels, air-conditioning plants, lifts, conveyor lines and generator changeover boards. A push-button on the front of a panel can start a 30 kW motor safely because a contactor does the heavy switching behind it.
A contactor is not a circuit breaker. It switches loads on and off all day, but it does not protect against short circuits. That job belongs to a breaker or fuse, and overload protection comes from a thermal relay. In a normal starter, all three work together.

Magnetic Contactor Price in Bangladesh: Sample Listed Prices
Prices move with exchange rates, import costs and stock. The table below shows real prices listed on Bangladeshi retailer websites when we checked in October 2026. They are samples to show the range, not a quotation.
| Brand and model | Approx. rating | Coil | Listed price |
| ABB AX09-30-10 | 9 A | Not stated | Tk 1,625 |
| ABB AX12-30-10 | 12 A | Not stated | Tk 1,960 |
| ABB AX18-30-10 | 18 A | Not stated | Tk 2,600 |
| ABB AX25-30-10 | 25 A | Not stated | Tk 3,850 |
| ABB AX40-30-10 | 40 A | Not stated | Tk 6,500 |
| Siemens 3RT1036-1A10 | About 50 A | Not stated | Tk 10,700 |
| Schneider LC1D40 | 40 A | 24 V AC | Tk 13,000 |
| Schneider LC1D65 | 65 A | 24 V AC | Tk 17,165 |
| ABB AF116-30-11-13 | 116 A | 230 V AC | Tk 24,500 |
| ABB AF140-30-11-13 | 140 A | 230 V AC | Tk 32,200 |
| ABB AF190-30-11-13 | 190 A | 100–250 V AC/DC | Tk 45,000 |
A few things stand out. Price rises steeply with current rating, which is natural, since bigger contacts and bigger magnets need more material. But the jump between brands at the same rating is also large. A 40 A ABB AX unit is listed at Tk 6,500, while a 40 A Schneider unit with a 24 V AC coil is listed at Tk 13,000.
Do not read that as one brand being simply better or worse. The Schneider unit has a low-voltage coil, a different series and a different retailer. Always compare the same rating, the same coil and the same series before you judge a quote.
What Pushes the Price Up or Down
Anyone tracking the magnetic contactor price in Bangladesh will notice that the same model can differ by thousands of taka between sellers. Several factors sit behind that.
- Current rating: Every step up in amps costs more, and the curve gets steeper above 65 A
- Brand and series: Premium global brands cost more than regional and budget ranges
- Coil type and voltage: Special coils, such as 24 V DC or wide-range AC/DC, usually cost extra
- Number of poles: A four-pole contactor costs more than a standard three-pole unit
- Auxiliary contacts: Built-in or add-on contact blocks raise the price
- Import channel: Authorised distributors, grey imports and local assemblers price differently
- Exchange rate: Most contactors are imported, so the dollar rate affects every quotation
Taxes and shipping matter too. A quote that looks low can exclude VAT or delivery, so ask whether the price is final.
How to Pick the Right Rating
Buying by price alone is the fastest route to a burnt contactor. Start with the load, then choose the size.
Contactors are rated by IEC utilisation categories, set in the IEC 60947-4-1 standard. The two you will meet most often are AC-1 and AC-3.
- AC-1 covers resistive loads such as heaters and furnaces, where switching is easy on the contacts
- AC-3 covers squirrel-cage motors that are switched off while running
The difference matters. When a motor starts, it can draw 5 to 7 times its normal running current for a moment. Because of that stress on the contacts, a contactor’s AC-3 rating is always lower than its AC-1 rating. For a motor, always read the AC-3 figure.
The table gives typical AC-3 sizing at 400 V for three-phase motors. Treat it as a guide and check the maker’s datasheet for the exact model.
| Motor power | Typical contactor rating (AC-3) |
| 4 kW | 9 A |
| 5.5 kW | 12 A |
| 7.5 kW | 18 A |
| 11 kW | 25 A |
| 15 kW | 32 A |
| 18.5 kW | 40 A |
| 30 kW | 65 A |
| 37 kW | 80 A |
| 45 kW | 95 A |
If the motor starts and stops often, drives a heavy load or runs in a hot panel, move up one size. That extra margin costs far less than replacing burnt contacts again and again.
Sizing a contactor too small is a false saving. Even a perfect magnetic contactor price in Bangladesh does not help if the part cannot survive the duty.
Coil Voltage and Other Specs
The coil is the part that listens to your control circuit, so it must match your control voltage. A wrong coil either will not pull in or will burn out.
| Coil voltage | Typical use |
| 24 V AC or DC | PLC panels, low-voltage control circuits |
| 110 V AC | Older machines, some imported equipment |
| 230 V AC | Most single-phase control circuits in Bangladesh |
| 400 V AC | Control taken directly from two phases |
Check these points before ordering:
- Pole count: Three poles for standard three-phase motors, four poles when a neutral must be switched
- Auxiliary contacts: Confirm how many normally open and normally closed contacts you need
- Mounting: Most are DIN rail or screw mounted, so match your panel layout
- Frequency: Bangladesh runs at 50 Hz, so confirm the coil is rated for it
- Operating temperature: Panels in hot rooms or near boilers need more margin
Brand Tiers Compared
Contactor brands sit in rough price tiers. This is a general picture and not a quality ranking for any single product.
| Tier | Examples | Price position | Typical buyer |
| Global premium | Schneider, ABB, Siemens | Higher | Factories, utilities, critical plants |
| Asian mid-range | LS, Chint and similar | Medium | Workshops, commercial buildings |
| Low-cost generic | Unbranded or local assembly | Lowest | Light, temporary or non-critical use |
Premium brands usually offer longer electrical life, better documentation and easier access to spares. Mid-range brands often give a sensible balance for everyday motors. Low-cost products can be fine for light duty, but they carry more risk when a motor starts under load every few minutes.
The magnetic contactor price in Bangladesh tells you only part of the story. A contactor that costs Tk 2,000 more but lasts three times as long is the cheaper choice.
How to Spot a Fake Contactor
Counterfeit electrical parts are a real problem in local markets. A fake looks the same on the outside, yet the silver contacts may be thin, the coil may overheat and the casing may not resist fire.
Watch for these warning signs:
- The price is far below every other seller for the same model
- Printing on the label is blurry, misspelled or uneven
- The weight feels light compared with a genuine unit
- There is no proper box, datasheet or warranty card
- The seller cannot give a batch number or an invoice
- The contacts or coil terminals look rough or poorly finished
Buy from an authorised dealer, keep the invoice and test the unit in a safe bench setup before it goes into a live panel. For quality and safety rules, you can also check the national standards body, the Bangladesh Standards and Testing Institution (BSTI).
A Short Real-World Example
Picture a small pump station that installs a bargain 32 A contactor on a 15 kW motor. It works for two weeks. Then the motor stalls once, the contacts weld shut and the pump keeps running with no way to stop it from the panel.
The owner chased the lowest magnetic contactor price in Bangladesh and saved a few thousand taka. The repair bill, downtime and the risk to the motor were many times higher. A properly rated, genuine contactor with an overload relay would have prevented the whole chain.

Buying Checklist Before You Compare Magnetic Contactor Price in Bangladesh
Before you place an order, run through this list. It takes five minutes and saves a lot of trouble.
- Confirm the motor power, voltage and starting method
- Choose the AC-3 rating and add a margin for heavy duty
- Match the coil voltage to your control circuit
- Ask for the exact model number, not just “32 A contactor”
- Request a datasheet and a written warranty period
- Compare quotes for the same series, coil and VAT status
- Keep the invoice for any future claim
If you are unsure, send the motor nameplate details to a supplier like integrated-power and ask for a recommendation. A good seller will ask questions before suggesting a part.
Frequently Asked Questions
What is the magnetic contactor price in Bangladesh?
It depends on rating and brand. Small 9 A units can cost under Tk 2,000, mid-size 40 A units range from about Tk 6,500 to Tk 13,000 or more, and industrial units above 100 A can cost Tk 24,000 to Tk 45,000 or higher. Always confirm today’s price with the seller.
Why does the same amp rating have different prices?
Brand, series, coil type, build quality and import channel all change the price. A 40 A contactor from one range may use a different magnet system and contact material from another range, so compare like with like.
How do I choose a contactor for a motor?
Use the motor’s power and voltage, then pick the AC-3 rating that covers it. For a 15 kW motor at 400 V, a 32 A contactor is the usual match. Move up one size for frequent starts or heavy loads.
Is a contactor the same as a relay?
No. A relay switches small control currents, while a contactor switches large power loads. A contactor also has much larger contacts and a stronger coil.
Can I use a contactor without an overload relay?
You should not. A contactor does not protect the motor from overload. Pair it with a thermal overload relay and a suitable breaker or fuse.
How long does a magnetic contactor last?
Life depends on the duty, the brand and how often it switches. Frequent starts under heavy load shorten it, while light duty can give many years of service. Choose a rating with margin for the best life.
Practical Tips Before You Buy
A few habits keep your panel safe and your costs under control, whatever the magnetic contactor price in Bangladesh is this month:
- Photograph the motor nameplate and send it with your enquiry
- Buy spare contactors of the same model for critical machines
- Tighten terminals during routine maintenance, since loose wires overheat
- Keep panels clean, dry and ventilated
- Record the model and purchase date on a label inside the panel
Conclusion
The right choice is not the lowest number on a quotation. It is the contactor whose rating, coil and quality fit your motor and your duty. Know the AC-3 rating you need, compare the same series and coil across sellers, and treat a very low price with caution.
The magnetic contactor price in Bangladesh will keep moving with exchange rates and stock, so confirm every quote before you pay. If you want a second opinion on sizing or a clear, itemised quotation, integrated-power can help you pick the right part and avoid costly mistakes. Send us your motor details, and we will respond with a suitable recommendation.




