A transformer is one of the biggest single purchases in any power project. A factory, a hospital, a housing estate, or a solar plant all depend on one. So the first question is always the same: what is the transformer price in Bangladesh, and how do I avoid overpaying?
There is no single answer, because the transformer price in Bangladesh depends on size, type, and build quality. This guide explains each factor in plain language, so you can read a quotation with confidence.
Here is what you will get from this article:
- A clear picture of the transformer price in Bangladesh and what moves it
- Key numbers on the country’s power sector
- A table of the main transformer types and where each fits
- A simple way to choose the right kVA rating
- A checklist for comparing quotations
- Common buying mistakes to avoid
- How Integrated Power helps you buy with confidence
- Answers to common questions

Why Transformer Demand Keeps Growing
Bangladesh is adding load every year. According to the U.S. International Trade Administration, installed capacity grew from under 5,000 MW in 2009 to more than 30,000 MW in 2025, and electricity access now exceeds 99 percent. Demand rises about 7 to 10 percent a year.
| Indicator | Figure |
|---|---|
| Installed capacity (2025) | More than 30,000 MW |
| Electricity access | Over 99% |
| Annual demand growth | About 7-10% |
| Projected peak demand by 2041 | About 60,000 MW |
| T&D system loss, FY2024-25 | 10.13% |
The loss figure comes from Bonik Barta, citing BPDB data. The same article notes that a commonly cited global benchmark for acceptable system loss is around 2 percent.
Why does this matter to a buyer? More capacity and more load mean more substations, and every substation needs a transformer. Efficient units also cut losses, and buyers who follow the transformer price in Bangladesh should watch demand too. That is why the transformer price in Bangladesh should never be judged on the purchase tag alone.
What Decides the Transformer Price in Bangladesh?
Two transformers with the same kVA rating can have very different prices. These are the main reasons.
| Factor | How it affects price |
|---|---|
| kVA rating | Larger units use more copper, steel, and oil, so cost rises with size |
| Type | Oil-immersed and dry-type (cast resin) units are priced differently |
| Winding material | Copper windings usually cost more than aluminum |
| Core quality | Better core steel lowers no-load loss, but costs more upfront |
| Voltage class | The 11 kV and 33 kV classes need different insulation |
| Standards and testing | Tested, certified units cost more than untested ones |
| Accessories | Tap changers, protection, and enclosures add to the bill |
| Raw materials and exchange rate | Copper, steel, and imported parts follow world prices and the taka |
Because of these factors, any quoted transformer price in Bangladesh is only meaningful when you also know the rating, the type, and the test standard behind it.
A Price Reference Point
Marketplace listings give a rough sense of scale. One listing page on BDstall says prices start from about Tk 2,000,000 for a 630 kVA unit. That page shows no date or seller, so treat it as a rough guide only. Ask for a fresh written quotation before you plan a budget.

Main Transformer Types and Where They Fit
Choosing the wrong type is a more expensive mistake than choosing the wrong brand. Type changes the transformer price in Bangladesh more than brand does. Here are the common options.
| Type | Typical use | Notes |
|---|---|---|
| Distribution transformer | Factories, buildings, local networks | Steps 11 kV down to 400 V |
| Single phase transformer | Pole-mounted rural and small loads | Compact and simple |
| Cast resin transformer | Hospitals, malls, high-rise buildings | Dry type, with no oil, so lower fire risk |
| Power transformer | Grid substations | Large ratings for transmission |
If you want the engineering background first, read Integrated Power’s power transformers knowledge collection.
Oil-Immersed vs. Dry-Type: Which Costs Less?
For the transformer price in Bangladesh, the usual pattern is simple. Oil-immersed units are often cheaper at purchase, and suit outdoor and industrial sites. Dry-type units usually cost more upfront, but they suit indoor spaces where fire safety matters.
The transformer price in Bangladesh for a cast resin unit may look higher on paper. Yet it can save on fire protection, oil handling, and building design. Compare the full installed cost, not just the unit price.
How to Choose the Right kVA Rating
Too small, and the unit overheats. Too large, and you pay extra for capacity you never use. Rating is the biggest driver of the transformer price in Bangladesh, so follow these steps.
- List your loads. Add up motors, lights, air conditioners, and machines.
- Apply a demand factor. Not everything runs at once.
- Add a margin. Many buyers leave room for growth, often around 20 to 25 percent, but ask an engineer to confirm.
- Match to a standard rating. Common sizes include 100, 200, 500, and 630 kVA.
- Check the power factor. A weak power factor wastes capacity. Integrated Power also supplies power factor improvement systems.
A correct rating is the quickest way to control your real transformer price in Bangladesh, because it avoids both oversizing and early failure.

How to Compare Quotations Fairly
The transformer price in Bangladesh is only one line on a quote. Use this table when you compare two or three offers.
| What to check | Why it matters |
|---|---|
| kVA, voltage, and vector group | Must match your network exactly |
| Copper or aluminum windings | Affects loss, life, and cost |
| Test reports | Proof of quality before delivery |
| Loss figures | Lower losses reduce your power bill for years |
| Warranty terms | Know what is covered and for how long |
| Delivery and installation | Delays can stall the whole project |
| After-sales service | Faults need a fast response |
Questions to Ask Every Supplier
- What standard does this unit follow?
- Can I see the test report?
- What are the no-load and load losses?
- What does the warranty cover?
- Is delivery, installation, and commissioning included in the price?
A reliable seller answers directly. Be careful with any transformer price in Bangladesh that comes with no specification sheet.
Common Mistakes Buyers Make
Even experienced buyers slip up. Watch out for these:
- Choosing the lowest price without checking windings or tests
- Ignoring losses, which add up over 20 years
- Buying the wrong rating or vector group
- Skipping site checks for oil, ventilation, and clearance
- Forgetting protection, such as fuse cutouts, surge arresters, and switchgear
A transformer works inside a system, and a low transformer price in Bangladesh means little if protection is missing. For the full picture, see Integrated Power’s electrical substation equipment guide and its article on substation equipment for industrial projects.
Tips for Getting a Better Price
You can often lower your transformer price in Bangladesh without lowering quality.
- Request quotes in writing from at least three suppliers
- Share exact specifications so quotes are comparable
- Bundle the transformer with switchgear and accessories
- Ask about stock units to cut lead time
- Plan early, since urgent orders cost more
Good suppliers want repeat buyers. Be open about your budget and schedule, and a fair transformer price in Bangladesh is easier to reach.

Why Buy From Integrated Power?
Integrated Power, which operates through substationequipments.com, supplies electrical power equipment in Bangladesh. Its range covers distribution, single-phase, power, and cast resin transformers, along with diesel generators, HT and LT switchgear, solar systems, and IPS and UPS units.
It also lists fuse cutouts, surge arresters, voltage stabilizers, and isolator switches. That means you can source the transformer and the protection around it from one place, which helps you control the total transformer price in Bangladesh. The site states that a sales representative will contact you within 24 hours of a quotation request.
To compare suppliers, you can also read its list of substation equipment companies in Bangladesh. Browse the products page or contact the team for a quotation.
Contact Integrated Power:
- Address: 165/7 West Rajashion, Birulia Road, Savar, Dhaka
- Phone: +880 1713117974 or +880 1717180660
- Email: [email protected]
- Website: substationequipments.com
Frequently Asked Questions
What is the transformer price in Bangladesh?
It depends on the kVA rating, type, windings, and test standard. One marketplace page lists prices from about Tk 2,000,000 for a 630 kVA unit, but this is a rough guide. Ask for a written quotation.
What affects the transformer price in Bangladesh most?
Rating and materials matter most. Copper windings, better core steel, and full testing raise the cost, and copper and exchange-rate changes move it over time.
Which is cheaper, oil-immersed or dry-type?
Oil-immersed units are often cheaper to buy. Dry-type units can cost more upfront, but suit indoor sites where fire safety matters.
How do I choose the right kVA size?
Add up your loads, apply a demand factor, and leave a margin for growth. Then match to a standard rating and confirm with an engineer.
Is the cheapest transformer the best deal?
Rarely. The lowest transformer price in Bangladesh can hide higher losses, weaker materials, or a short warranty. Compare total cost over the unit’s life.
Wrapping Up
The transformer price in Bangladesh is shaped by rating, type, materials, testing, and supplier service. Know your load, compare like with like, and look beyond the first number on the quotation.
Choose a supplier that shares specifications, test reports, and warranty terms openly. Do that, and you will secure a fair transformer price in Bangladesh for a unit that runs safely for years.
Ready to request a quotation? Contact Integrated Power at substationequipments.com and share your kVA and voltage needs.
Sources: U.S. International Trade Administration; Bonik Barta (BPDB data); BDstall; Integrated Power.




